Looks good....
Announcement
Collapse
No announcement yet.
Rattle can paint job.
Collapse
X
-
You want to use the toughest clear coat you can find. I used some i got at the auto parts store. Made for wheels. I had camoed an old hardwood stoch for my marlin 25m, and the clear coat is too soft. So i searched for the best i could when i did this to my r700.
There is a 2 part rattle can clear coat out there, but its pricey, ans has a short shelf life after mixing.
There is a how to a member did a few years ago in the DIY section.
Last edited by double bogey; 04-05-2020, 08:29 AM.
Comment
Comment