Following
Announcement
Collapse
No announcement yet.
New Deer Stand (Trump Tower)
Collapse
X
-
Originally posted by hlavinkajustin View PostYa we will have a tractor for extra support while picking it up off the trailer. Other than that we will have a winch on another pickup helping raise it. Pretty much where we lift it off the trailer is the location where it will be going. The bottom skid is designed to be 12x12 with the legs at a pretty good angle to match up to the 8x8 too so it should be ok as far as support from tipping.However i **** sure plan on taking extra precautions and driving tpost in the ground to make me feel better.
Comment
-
Originally posted by hlavinkajustin View Post3/8 plywood for the sides 3/4 for the floor and 1/2 for the roof with a couple sheets of tin for cover
Sent from my SM-G970U using Tapatalk
Comment
-
Originally posted by Palmetto View PostThat's too much span for plywood man. Its gonna bow, and be flimsy at the laps. I would put more wall bracing in.
Sent from my SM-G970U using Tapatalk
Comment
-
Originally posted by Matt_C View PostUh.... I don't think you will need t-posts in the ground The weight of that beast will surely keep it in place. Surely.
Comment
-
Originally posted by hlavinkajustin View PostI’m using 2x2 boards for runners along the sides to beef it up some. Ya it would have way too much give just leaving it with only screwed to the frame
Comment
Comment