Decided to just make one thread for all of my around the house projects.
First Post is my fence. I sprayed a 1:4 bleach to warm water mix onto the fence with a 4 gallon sprayer. Then came behind with a pressure washer while the mix was still wet on the fence and lightly pressure washed the surface. You want to remove some of the wood just not create deep gouges.
After the wood dried a couple of days I picked up some
WoodScapes Exterior Solid Stain/Paint in the color of choice. 9 Gallons sprayed through a graaco airless rig. Two coats, waited around 24 hours in between coats. It definitely needed two coats.
Overall very happy with the results. I am positive i saved over a thousand dollars here.
First Post is my fence. I sprayed a 1:4 bleach to warm water mix onto the fence with a 4 gallon sprayer. Then came behind with a pressure washer while the mix was still wet on the fence and lightly pressure washed the surface. You want to remove some of the wood just not create deep gouges.
After the wood dried a couple of days I picked up some
WoodScapes Exterior Solid Stain/Paint in the color of choice. 9 Gallons sprayed through a graaco airless rig. Two coats, waited around 24 hours in between coats. It definitely needed two coats.
Overall very happy with the results. I am positive i saved over a thousand dollars here.
Comment