Pull my 24’ lowboy 95% of the time, but needed my ball height raised by about 4”. Took my 3-ball receiver and chopped off the 2 5/16 ball. Cut 2 pieces of heavy-wall 4” square tubing and then found and old thick shank ball. Burned a hole in the top tubing and then slid the ball in and welded the bolt to all 4 sides of the inside of the tubing. Flipped it over and welded the top of the ball base. Then fitted it all together and welded it and then capped off the ends with heavy strap plate and welded it all together. Finished by shooting some black paint on it. She’s solid.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Comment