Cutting aluminum diamond plate.

[S-3 Ranch]

Is diamond plate stronger than sheet aluminum same gauge
I.E could I drop a size or two to save weight on a build with out sacrificing anything
Are the welded seems any different?

[cashcropper]

You can use a Skilsaw or jigsaw. Mark or scribe your line then spray line with WD-40 or any of the other spray lube oils then cut. It will cut very easily. Wear safety glasses or goggles.

[tx.biologist]

l cut 1/8th Aly plate all the time with my skilsaw with a carbide blade for my bowishing/flounder gigging platform all the time. No lube, just go slow. Oh wear ear and eye protection shavings go everywhere.

[ckamp52]

l cut 1/8th Aly plate all the time with my skilsaw with a carbide blade for my bowishing/flounder gigging platform all the time. No lube, just go slow. Oh wear ear and eye protection shavings go everywhere.

I’m gonna try and be mature and not comment on parts of this...so flipping hard not to


Sent from my iPhone using Tapatalk

[muzzlebrake]

For straight cuts I use a plywood blade turned backwards in a skilsaw. Noisy but it works.