I'm sure i'm not the only one that doesn't care for the factory grips. So thanks to a fellow TBHer I was able to get my hands on a takeoff grip (so that I wouldn't mess up the one on my Drenalin). Heres what I did sorry for the bad pics they are from a cell phone.
Used a file and sandpaper to remove the palm and thumb swells on each side of the grip.
Applied roughly 4 coats of minwax polyshade stain (stain and polyurethane mix).
Sanding in between coats
Lightly sanded the final coat with 220grit to remove some of the imperfections and give the grip a little character.
Used a file and sandpaper to remove the palm and thumb swells on each side of the grip.
Applied roughly 4 coats of minwax polyshade stain (stain and polyurethane mix).
Sanding in between coats
Lightly sanded the final coat with 220grit to remove some of the imperfections and give the grip a little character.
Comment