I haven't thought about that. I have some time to figure it out, as I don't really need the bait well right now. When I figure out how it's going to sit/ride, and where I need the extra weight, I'll have one built. After that I'll plumb in my baitwell.
After church today, I came home, gave the boat one more good cleaning, then got to work painting the inside. You'll notice the inside isn't finished looking, but I'll have hydro-turf on anything unfinished.
About halfway through the inside, I knew I didn't buy enough paint to finish. Not much I can do now, but spray what I have. I didn't want to have to wait for this to dry, then flip the boat to paint the bottom, so I had to come up with a plan to paint everything at onxe. (At least until I run out of paint) Saw horses in the back, hanging in the front by FEL then pull the trailer out from under it. It's holding well, the inside is painted, float boxes, gunnels, transom, and 1 1/2 sides. I'm lacking a half side and the bottom.
Think I'm going to get enough paint to finish and add a second coat. I should be able to do that tomorrow after work. Tuesday I should have motor on, and everything wired up. I'll have to make a run to get registration/boat numbers Wednesday morning, then hopefully put this rig in the water Wednesday after lunch.
Sent from my XT1254 using Tapatalk
After church today, I came home, gave the boat one more good cleaning, then got to work painting the inside. You'll notice the inside isn't finished looking, but I'll have hydro-turf on anything unfinished.
About halfway through the inside, I knew I didn't buy enough paint to finish. Not much I can do now, but spray what I have. I didn't want to have to wait for this to dry, then flip the boat to paint the bottom, so I had to come up with a plan to paint everything at onxe. (At least until I run out of paint) Saw horses in the back, hanging in the front by FEL then pull the trailer out from under it. It's holding well, the inside is painted, float boxes, gunnels, transom, and 1 1/2 sides. I'm lacking a half side and the bottom.
Think I'm going to get enough paint to finish and add a second coat. I should be able to do that tomorrow after work. Tuesday I should have motor on, and everything wired up. I'll have to make a run to get registration/boat numbers Wednesday morning, then hopefully put this rig in the water Wednesday after lunch.
Sent from my XT1254 using Tapatalk
Comment