Height of bottom of window for bow blind?

[robbyreneeward]

Going to build a blind on my platform for my Pop up so I have something a little more permanent and roomy. Using deer view windows, most likely 12x24 running vertical. What's the best measurement for the height of the bottom of the windows for most clearance and still not see too much movement? Will be using an office chair inside

[bsmizzy07]

I want to say I put mine (10x24" deer view) at 30". I could be wrong, but if no one else chimes in, I'll get the exact measurement this weekend when I'm at the lease. I found that the height I put it at was good for shots at 4-5 yards both being on the ground or elevated 6' like my blind is.

[jerp]

Most pop up windows start at around 32" which is fine if you are sitting on the ground but if your platform is more than about 4' you will need to go lower for close shots

[robbyreneeward]

Yeah forgot to mention I'm 6 1/2' off the ground

[Stan R]

What is the height of the chair you will be sitting in? What is the height of the platform the blind will be on?

[robbyreneeward]

Platform is 6 1/2' tall and the chair will be 18-20" to the seat

[berto]

I think I'm going to do mine at 25. 30 seemed high

[bsmizzy07]

Ok I can correct my window height now: mine are actually at about 24". I built the walls to have the window at 28", but actually flipped the walls upside down to get the window at 24" from floor to bottom of window frame. Here's a pic from before it was put on a tower:

[robbyreneeward]

Ok I can correct my window height now: mine are actually at about 24". I built the walls to have the window at 28", but actually flipped the walls upside down to get the window at 24" from floor to bottom of window frame. Here's a pic from before it was put on a tower:

Hey thanks buddy

[Kenny Borel]

Mine are at 22"