We have a few steep angles where clearance can be an issue.
So I decided to make these to help protect the sides of my ranger from getting anymore chewed up from the rocks.
I used 1.5 inch X 1/8 inch thickness Angle iron and self tap screws to secure it to the undercarriage.
I think 2 inch Angle would work better but I already had the 1.5 so I used it.
Total cost was maybe $15
So I decided to make these to help protect the sides of my ranger from getting anymore chewed up from the rocks.
I used 1.5 inch X 1/8 inch thickness Angle iron and self tap screws to secure it to the undercarriage.
I think 2 inch Angle would work better but I already had the 1.5 so I used it.
Total cost was maybe $15
Attached Files
Comment