Here's one I built a couple of years ago. I changed the bottom outlet tube to PVC with four outlets. The flat plate I had set up on it that you see in the picture was holding water and clogging up the end. It also has longer legs that that on it, Those were cut just so I could check and see if it was water tight. I also added the step so some one can stand and fill while someone in the back of a truck can hand them up to you. Hope this helps.
I have a new design that's should work better that I'm gonna work on this summer if I get time.
I have a new design that's should work better that I'm gonna work on this summer if I get time.
Comment