Polaris Ranger Roof

[gingib]

awesome! I just bought a similar one for a 2014 Ranger 800 for $449 TMD

[ateague11]

Any pics or details of the roof build. Awesome work!

I measured the overall roof dimensions required including the all 4 bent sides and provided to a local fab shop. They sheared the 16ga diamond plate to the overall size and used a metal break for the 3" sides only. Cost from the metal fab shop was around $130.00....Below is picture as received from the metal fab shop. I set it on the roll cage to mark the front and back angles. I then scored the back/bottom side of the roof for the 4" front and 5" back turn-downs which made it easier to bend myself. After the I bent the front and back I welded the corners and smoothed everything up. Finished it by using the Rustoluem Spray can bedliner.

I can provide the overall plate dimensions I used for my Ranger 570 midsize if anyone is interested.

[TexasCanesFan]

Polaris Ranger Roof

http://tuffledlights.com/product-cat...bo-light-bars/

Awesome. Thanks.

Which model did you put on the front?

[Electrican]

That sound bar is sweet!!

Nice build!

[ateague11]

Awesome. Thanks.

Which model did you put on the front?

Here you go!

http://tuffledlights.com/products/ultra-series-led-light-bar-42-inch-240-watt/

[TexasCanesFan]

Thank you sir

[ateague11]

sure thing...I can't attest to its longevity but looks to be a good solid light out of the box..and very bright over 20,000 lumens

[TXPower]

Thank you sir, I think I'm going to do a top the way you did. Looks great and sturdy too.

[Ride_Klein]

How do you like the wetsound stealth bar? Does it have good lows, or is it all highs?

Great looking project.

[ateague11]

I like it a lot .. It doesn't have real good lows but good mids and highs

[ballgame]

I measured the overall roof dimensions required including the all 4 bent sides and provided to a local fab shop. They sheared the 16ga diamond plate to the overall size and used a metal break for the 3" sides only. Cost from the metal fab shop was around $130.00....Below is picture as received from the metal fab shop. I set it on the roll cage to mark the front and back angles. I then scored the back/bottom side of the roof for the 4" front and 5" back turn-downs which made it easier to bend myself. After the I bent the front and back I welded the corners and smoothed everything up. Finished it by using the Rustoluem Spray can bedliner.

I can provide the overall plate dimensions I used for my Ranger 570 midsize if anyone is interested.

Yes please provide dimensions. I will be building one in April. Great build!

[ateague11]

Yes please provide dimensions. I will be building one in April. Great build!

I will try and take some measurements this weekend and post them

[ballgame]

I will try and take some measurements this weekend and post them

Great thanks!

[dpg481]

I built a similar roof for my ranger last year. You are gonna want to get some windlace to run around the edges. It will save the foreheads of all people in an out when they bump their head.

[ateague11]

Here are the measurements I used for my 2014 midsize