Has anybody on the GS made their own truck bed cargo storage system?
I am fixing to pull the trigger on building one for my f150; the idea will be to make it with 2x10's as framing/ side walls and 3/4" plywood to enclose top and bottom. Truck bed liner (roll-on stuff from lowes, HD, etc) would be applied to the exterior. Interior will be carpeted.
The main enclosure will be 46.5" x 61.25" and 10" interior height. Gas struts will be used to assist in opening from the top.
Sides of the main enclosure will covered with ploy wood and enclose wheel wells.
I intend to take pictures and post when I start.
I am fixing to pull the trigger on building one for my f150; the idea will be to make it with 2x10's as framing/ side walls and 3/4" plywood to enclose top and bottom. Truck bed liner (roll-on stuff from lowes, HD, etc) would be applied to the exterior. Interior will be carpeted.
The main enclosure will be 46.5" x 61.25" and 10" interior height. Gas struts will be used to assist in opening from the top.
Sides of the main enclosure will covered with ploy wood and enclose wheel wells.
I intend to take pictures and post when I start.
Comment