DIY Euro Mount

[Skullworks52]

Had one of last years buck horns laying around and decided to make it into a mount,I sanded the skull with 600 grit sandpaper,then clear coated the horns and skull; then built a ''L'' frame out of aluminum to fit inside the brain cavity, two bolts to secure it to the skull and two more to the wood plaque.

[jon52508]

Man thats pretty neat. Ive always wanted to try that. I'll have to pm ya for tips.

[Peacock]

Looks good. Did you break the nose piece?

[Skullworks52]

Looks good. Did you break the nose piece?

It was fragile from the start so I opted to cut it off, I'd rather do it now then have someone jack with it and break it, rather be me to do it than someone else.

[Skullworks52]

Side view. I used 1 1/4'' flat strap that is bent to place the horns in a presentable position.

[Carbon Poison]

looks good!

[Old Bald Guy]

Nice job! Grandpa's old Marlin 39D looks nice on the wall also.

[carson]

looks nice

[clayton_10]

I've got some I need to do this with. Good idea.

[Shake N' Bake]

Looks good!

[SwampRabbit]

Nice job. I've done a couple myself. For the nose peices, since I boil my skulls, they tend to come of anwyays and I just superglue them back on (as well as any teeth, etc that might come loose.)

[Skullworks52]

Nice job. I've done a couple myself. For the nose peices, since I boil my skulls, they tend to come of anwyays and I just superglue them back on (as well as any teeth, etc that might come loose.)

When I clear coated the skull it held the teeth in place. So it killed two birds with one stone!

[Mex. Bowhunter]

Looks good

[aw23846]

looks real nice!

[Bourbon3]

looks great