I used 1/4 inch thick 2.5 inch square tube for the main part. The mounts for the cat 1 pins and top link were 1/4 inch thick 2.5 flat bar. The receiver part was bought from Walmart. The braces were piece I had laying around.
I built one like that to move boats around the yard. Seen them online for $200 plus and said, hell I can build one for free ! Looks good Stan, it aint going to break
We have a very similar one built for our cat 2 that we put beefed up completely and keep on the tractor a lot. Hauls a gooseneck with 14 bales just fine.
We have a very similar one built for our cat 2 that we put beefed up completely and keep on the tractor a lot. Hauls a gooseneck with 14 bales just fine.
Comment