I came up with this design several months ago and gave them to my sons that own a sign business and told them to use it and abuse it; they make and install large signs all over Texas, and they have put this little knife through the rinnger and love them. So I'm going to put them in production, I think it will be a good seller for me. It's a no frills whistles and bells working knife that will work any place you need a knife.
1084 60 hrc, EDC Drop Point 7 ¾ OAL, the blade is 3/16 thick the blade is 1 5/6 at the widest point. I put a edge on top with a Moran grind (Convex) to leave more steel at the tip and spine, acid etched and buffed with scotch Brite belt and has thumb notches on spine. Blue Black G-10 Scales, red liners, pinned with two 5/16 corby screws. Comes with handmade sheath the fits like a glove.
1084 60 hrc, EDC Drop Point 7 ¾ OAL, the blade is 3/16 thick the blade is 1 5/6 at the widest point. I put a edge on top with a Moran grind (Convex) to leave more steel at the tip and spine, acid etched and buffed with scotch Brite belt and has thumb notches on spine. Blue Black G-10 Scales, red liners, pinned with two 5/16 corby screws. Comes with handmade sheath the fits like a glove.
Comment