I've been tryin my hand at makin knives for a little bit. My boy was wantin/needin a stickin blade & I came across an OLD Nicholsen file, so I commenced to grindin.
Profiled
1st grind, annealed, re-ground, sanded, tempered, & resanded
Fittin the handles to it. Axis butt & bolster, walnut spacers, mesquite, & stainless pins.
Polished & sheathed
Coop's brand stitched into the belt loop
I try not to be too prideful, but I will say this is my best work!
Profiled
1st grind, annealed, re-ground, sanded, tempered, & resanded
Fittin the handles to it. Axis butt & bolster, walnut spacers, mesquite, & stainless pins.
Polished & sheathed
Coop's brand stitched into the belt loop
I try not to be too prideful, but I will say this is my best work!
Comment