This is my second camera setup like this. My first setup is with a Moultrie I40 and I used a Stealthcam 12volt battery pak I bought from my brother. It has been up since August with no problems. I used some tips from Tgil's thread for this setup. I bought this enclosure from Home Depot to store the battery and wiring.
I drilled a hole underneath for the clamp connector.
For this setup I used a 6V DC plug from an old toy that I was going to throw out. I split the wires and connected female disconnects to the ends and connected them to the battery.
After all wires are connected from the solar panel, I drilled 4 holes in the front cover of the enclosure to line up with the the holes on the Primos 46 camera. Then I attached camera with 4 bolts.
A pic of it finished.....this setup will be bolted to a 4x4 post which is attached to a t-post at the lease. The solar panel is screwed to the top of the 4x4.
I drilled a hole underneath for the clamp connector.
For this setup I used a 6V DC plug from an old toy that I was going to throw out. I split the wires and connected female disconnects to the ends and connected them to the battery.
After all wires are connected from the solar panel, I drilled 4 holes in the front cover of the enclosure to line up with the the holes on the Primos 46 camera. Then I attached camera with 4 bolts.
A pic of it finished.....this setup will be bolted to a 4x4 post which is attached to a t-post at the lease. The solar panel is screwed to the top of the 4x4.
Comment