Following..
Announcement
Collapse
No announcement yet.
Boat Trailer Rifle.....House.
Collapse
X
-
That's all I've got for now. I'm waiting for some free material from a buddy of mine to start the inside finish-out.
I bought a sheet of lexan for the windows, and I've ordered the extruded aluminum tracks for them to slide in. Have to get walls and paint up 1st. Then the lexan windows, trim, carpet, lights, gas line, and stabilizer jacks on the back.
Comment
-
Inside dimensions are 6' across, 10'2" long, 73 high at the top of the side walls, and I think 83 1/4" at the highest point in the middle.
Hopefully I'll get the free stuff to sheath the inside this weekend, if not I'll have to tie up as many loose ends as possible, and maybe work on stabilizer jacks for the back.
Comment
-
I was gonna build some kind of drop down stabilizer/outrigger legs for the back. Initialy I thought I'd use fold down trailer tongue jacks.....but they have too much play to suit me, so I thought I'd build something. Then I remembered the jacks my old pop-up camper had before my coward ex roomate stole it.
I searched around a bit for something similar, and just ordered these!
I'll probably need a set for the front too, but the tongue jack will due for now.
Comment
-
Havnt updated in a while, because I havn't had time to work consistently. I put plywood around the bottom 2' where the carpet will go up the walls. And I lined te rest of the inside with some masonite type stuff because my friend got it for free. Tonight I put 1X3 pine around the perimeter even with the top of the windows. This is what the lexan windows will but up against when up/closed.
Hope to start on the track for the lexan to slide in tomorrow.
Comment
Comment