500 gallon sprayer redo

[Stan R]

I picked this up for a decent price and decided to redo all lines, fitting, controller, etc. It has a good working Contential Belton gear pump,

[Stan R]

pic of parts each page has parts for tje part.

[Dusty Britches]

Updates?

I buy my sprayer parts from https://www.spraypartswarehouse.com/. Uber cheap compared to any store in our area.

[Stan R]

I am getting all the parts together. I am adding a hand sprayer, making a fence line sprayer on the back. and adding a drain hole.

I am replacing all parts except the pump and the boomless sprayer. I should be able to start this weekened.

I never realized how many parts are on a sprayer. I took each section, made a list. then shopped on line, the coop, and centerville hardware.

I was going to keep but decided to sell. I just do not need anything that big. Pretty much already have it sold.

[Radar]

I have been watching the auctions for a 200-300 gallon sprayer and they are either tore all up or too high in price. I bid on one at the Anton auction and it sold for 7000.00🙄, people seem to lose their minds at an auction.

[Stan R]

Omstalled 2 new bulkhead fitting to replace to old one's and made a new one for a drain. I got the controller set up. The 4 hose fitting are for boomless nozzle, agitator, pressure overflow, and hose sprayer line.

[Stan R]

I

[Stan R]

Replaced the rubber on the cradle for tank. Adding all the lines and fitting

[Stan R]

ONly thing left is to repack the wheel bearing. I told they guy that is most likley going to buy it I called it the Rat Rod Sprayer

\

[bowhntrmatt]

Looking good!!