I saw one and just had to make it

[Stan R]

I think it turned out good

[Dusty Britches]

What is that, Stan? What does it do?

[Chew]

Just too many details. I can't process the step by step instructions.

[Mike Fangman]

What is that, Stan? What does it do?

I think its just a portable air tank.

[TRH]

I'm going with pipe bomb.

[CabezaBlanca]

I don't think you could air a balloon up with that. What is the purpose?

[Stan R]

makes putting slime in tires very easy.

[Dusty Britches]

Well I'll be. So you don't have to remove the valve stem?

[straightGrizzly]

Them Alphabet Soup boys right about now....

[wickll]

Well I'll be. So you don't have to remove the valve stem?

Still have to pull the valve stem. At least I do when I use mine.

[CabezaBlanca]

makes putting slime in tires very easy.

I bet it does! Makes sense to me now.

[Stan R]

I'll post pictures and instructions Sunday. I need to get a few more parts.

[Stan R]

Here we go



2 inch pvc this one is 12 inch
pvc end cap
pvc clean out
3/8 barb with 3/8 mip thread copper fitting
3/8 barb with 1/4 mip thread copper fitting (use with the lock air chuck
3/8 npt nutt
1 metal tire stem with value stem removed (the ones I ordered came with 2 gaskets. I used the larger gasket)
1 lock air chuck with inside parts removed
2 clamps

I used Teflon tape on this one. where needed. The bigger one I used silicon caulk.

I drilled 5/8 inch hole in clean out and end cap

I threaded the end cap with correct die

The 2 inch tub will hold 3 cups of water.

Should be pretty basic to assemble.

@2 inch PV