Looks good Joey!!!!! i too learned the hard way about neck bearings. i stretched my front forks out as far as they would go. Looks like yours are dropped a little bit, i kinda like that. you gona leave it lowered?
Announcement
Collapse
No announcement yet.
Chicken Hawk ~ Joey's Scooter
Collapse
X
-
Im not 100% on the ride height, Froggy.
Chief! Quit it!!!
Now you got me thinkin airbags.......Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Im not sure I am diggin it.
We shall see.Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Fender Art
I redneck dimple dyed the rear fender. It cam out good, I reckon.
There were alrady holes in the fender from the front fender bracket. I measured em, split the difference....and drilled some more 1/4" holes.
I then got a 1/4" counter sunk screw, a 1/4" nut an warsher, and a 3/8" nut. I pulled the screw head against the fender and into the 3/8" nut.
I still havent decided on fender length. I will know that after the hardtail is complete. I also need to get some 1" strap for fender struts.
Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
-
Originally posted by Big_gun View Postnice so far... How stout is the tube going to ready wheel? or will their be any braces back to the frame?
1" x .120 DOM with slugs welded in at the joints.Ultramatic Feeders
We're paratroopers, Lieutenant. We're supposed to be surrounded......
/l _ ,[____],
l---- L-- -OlllllllO-
()_)--()_)---o-)_)
Comment
Comment