Bought me a new video on black friday, took it out to deer stand on sunday morning hunt. It was a job to hold camera steady while trying to take pics. and videos. So i put on my thinking cap and came up with this ( probably nothing new) here's my shopping list.
First drilled hole in C- clamp 1/4
Then bent my all thread ( broke it first time, to sharp of bend)
Double nutt the short side of bend and a lock washer
Placed it threw hole in clamp and placed lock washer and wing nut.
On long side of bend placed wing nut upside down, flat washer and rubber washer.
Tighten every thing finger tight, screw on camera and clamp. Makes it very adjustable in any direction.
Hope it works, I'll be taking it out tonight.
First drilled hole in C- clamp 1/4
Then bent my all thread ( broke it first time, to sharp of bend)
Double nutt the short side of bend and a lock washer
Placed it threw hole in clamp and placed lock washer and wing nut.
On long side of bend placed wing nut upside down, flat washer and rubber washer.
Tighten every thing finger tight, screw on camera and clamp. Makes it very adjustable in any direction.
Hope it works, I'll be taking it out tonight.
Comment