Supplys needed:
- 3lb coffee can
- 16" 1X4
- 4-.75" wood screws
- ty-rap


Cut coffee can as shown. I used my pocket knife.

Attach to 1X4 using wood screws.


Cut 2 small holes for your ty-rap.

Run ty-rap thru 1 of the cuts in your cover, then thru the strap slots on the back of your trail cam, back thru the other cut in your cover, around the 1X4 and tighten the ty-rap.

Run your trail cam strap between the coffee can and 1X4 and attach to the tree of your choice.
- 3lb coffee can
- 16" 1X4
- 4-.75" wood screws
- ty-rap
Cut coffee can as shown. I used my pocket knife.
Attach to 1X4 using wood screws.
Cut 2 small holes for your ty-rap.
Run ty-rap thru 1 of the cuts in your cover, then thru the strap slots on the back of your trail cam, back thru the other cut in your cover, around the 1X4 and tighten the ty-rap.
Run your trail cam strap between the coffee can and 1X4 and attach to the tree of your choice.
Comment