Bow Holder for Polaris Ranger

[Gold]

Looking for a cheap way to safely carry your bow on your Ranger? I made these using 1 and 1/2 inch PVC and fittings. I've been using them for several years without any problems.

I don't have the measurements but after looking at the pictures below you should be able to figure it out. I bought some Velcro from Lowe's that is about 14 inches long and is made to secure garden hose or extension cords. This is what I used to secure my bow to the holder. I hope the pictures tell the story...

[bowsticker]

How much will the bow bounce around?

[Gold]

Not at all, the Velcro holds it down!

[Birddogss]

very nice!! Looks like I will be making one tomorrow at work Thanks for sharing

[apbowhunter]

F'n A Cotton! I've have been trying to think of something and this is perfect and cheap and PERFECT. Thanks for sharing!

[jkf123]

Very nice!

Looks like you need a new TBH sticker

[Peacock]

Awesome! Thanks for sharing.

[bowmansdad]

Great idea, Robyne, even I can make it! Nice pool also.

[onetondodge]

That is one cool setup.

[tomcat8910]

Nice!

[Quackerbox]

How much will the bow bounce around?

My concern as well.

Good thing is I can run over to my brothers house and allocate what I need from his work truck for free

[tookeymonster]

I just throw my bow case in the bed of my Rhino. That way bow bow is fully protected.

You do have a good idea

[Birddogss]

Hey I know you said 1 and 1/2 inch PVC but looking at the pic up close ,one of the T's is just a 1 inch.... Or am I not seeing clear?

[Gold]

Birddogss,

You may be right! I made these several years ago and I don't remember what size it is. You better measure the holes in your Ranger before starting this project. Sorry....

I was just guessing.

[Birddogss]

Birddogss,

You may be right! I made these several years ago and I don't remember what size it is. You better measure the holes in your Ranger before starting this project. Sorry....

I was just guessing.

No worries Its a great idea!!!! I have enough 1" scrap here at work to make one, so I'm going to try it after work and I'll let ya know