Years ago, when I hunted in a different state, I was hunting public land. Feeding was allowed in the off season, but I didn't want to invest in feeders that anyone could come upon - after all, it was public land.
So I got some PVC drain pipe - bigger stuff - 4" diameter. I cut two pieces - one 4' long, and one 1' long. I joined them with an elbow. On the short piece, I permanantly attached a cap on the end. Then I stood it up so it looked like a big "L". On the short piece, facing up, I cut out the entire top section, so the deer could eat, and smoothed the cut edges. Then I put a cap on the top (not permanant - but attached to the pipe piece with two screws and a small piece of decorative chain - just to keep the cap with the feeder should it come off). Painted the whole thing with camo paint with the exception of one little piece up top that I left white so I could put my name and phone number (as required).
Took them out to the woods and attached them to small trees with heavy duty zip ties. Filled with corn, caped the top and I was done. Checked several times each week, and they worked extremely well.
Total cost for 4 feeders was $44, or $11 each, which I considered a bargain.
$2 for caps x 8 = $16
$9 for 4"x10' pvc pipe x2 = $18
$2.50 for 4" 90 degree elbows x 4 = $10
Anyone else use these, or something similar?
All the best,
Glenn
So I got some PVC drain pipe - bigger stuff - 4" diameter. I cut two pieces - one 4' long, and one 1' long. I joined them with an elbow. On the short piece, I permanantly attached a cap on the end. Then I stood it up so it looked like a big "L". On the short piece, facing up, I cut out the entire top section, so the deer could eat, and smoothed the cut edges. Then I put a cap on the top (not permanant - but attached to the pipe piece with two screws and a small piece of decorative chain - just to keep the cap with the feeder should it come off). Painted the whole thing with camo paint with the exception of one little piece up top that I left white so I could put my name and phone number (as required).
Took them out to the woods and attached them to small trees with heavy duty zip ties. Filled with corn, caped the top and I was done. Checked several times each week, and they worked extremely well.
Total cost for 4 feeders was $44, or $11 each, which I considered a bargain.
$2 for caps x 8 = $16
$9 for 4"x10' pvc pipe x2 = $18
$2.50 for 4" 90 degree elbows x 4 = $10
Anyone else use these, or something similar?
All the best,
Glenn
Comment