For those that have the Dren, I finally have my bow shooting great, the question I have i noticed on the Mathews website it says the centershot should be like 11/16 off the riser. Mine is not that far from the riser I was just curious approx how far is your centershot. Also which is correct I have heard both- not to use a centershot tool as these are set differently, but to use the 11/16 as a centershot and vice versa. Whats the game.
-
-
Generally 11/16 is close, but if your cc is further inside, there may be a problem with hand position or possibly a leaning cam or idler wheel.
If your cam is leaning, limbs will have to be changed.
If idler is leaning, simply twist the appropriate side of split buss cable. -
Thanks for the input,thats what did they put a twist in, but I was just curious if you use a centershot tool such as a laser or just measure off as some on the Mathews forum suggest.JoelComment
-
I was born with the only tools I use(my eyes), to set up center shot on a bow, besides my paper rack and broadheads.Comment
Comment