How fast must an arrow be traveling to kill a deer? I am only asking because I want to buy my son a youth bow, but don't really know when he can shoot it as a real deer? What fps does it need to kill a deer?
X
-
According to the wisdom of our wonderful TPWD commission, it don't matter... you can shoot a deer with any bow... no poundage restrictions at all... heck, get him a bear panda, pull off the rubber stoppers and glue on a big ol broadhead and he's set to go!!! NOT... but the way our stupid regs are written, it could be done, legally
Comment
-
I love all the responses to this question that are just opinions. If you haven't tested a bow that is below 45 pounds, then how can you possibly respond to this thread?
My son has an 18 inch draw and shoots just over an 18 inch arrow. He has taken 2 shots at animals with his bow and has successfully recovered both. He was shooting a 30 pound parker buckshot both times. One was a hog just around 165 pounds and the other was an 8 point. So until you test low poundage bows on penetration etc... you will never know the answer to this question.
Comment
-
Originally posted by txhunter View PostI love all the responses to this question that are just opinions. If you haven't tested a bow that is below 45 pounds, then how can you possibly respond to this thread?
My son has an 18 inch draw and shoots just over an 18 inch arrow. He has taken 2 shots at animals with his bow and has successfully recovered both. He was shooting a 30 pound parker buckshot both times. One was a hog just around 165 pounds and the other was an 8 point. So until you test low poundage bows on penetration etc... you will never know the answer to this question.
Comment
-
I have tested all different arrow weights and broadhead trying to get the best penetration on Eastons bow. The #1 factor I have found is draw length. If the draw length is 20 or above 35# is great. When Easton was at 18" draw he shot a ram and a hog, both died but as he grew the longer draw length made alot more of an impact on speed and KE than the increase of 5#. Does that make since?
Comment
-
Originally posted by jaghunter58 View PostHow fast must an arrow be traveling to kill a deer? I am only asking because I want to buy my son a youth bow, but don't really know when he can shoot it as a real deer? What fps does it need to kill a deer?
You got people who like speed and others who like kinetic energy over speed.
My opionion i would say 250 is a nice round number or faster for your FPS.
And 65 kinetic isnt bad either.
Comment
-
Originally posted by txhunter View PostI love all the responses to this question that are just opinions. If you haven't tested a bow that is below 45 pounds, then how can you possibly respond to this thread?
My son has an 18 inch draw and shoots just over an 18 inch arrow. He has taken 2 shots at animals with his bow and has successfully recovered both. He was shooting a 30 pound parker buckshot both times. One was a hog just around 165 pounds and the other was an 8 point. So until you test low poundage bows on penetration etc... you will never know the answer to this question.
Originally posted by BowTechAssassin View PostI may be wrong and usually am, but I believe speed isn't the factor, draw weight is. 45 lb minimum I believe.
Comment
Comment