Help needed locating materials

[tx07]

Ok peeps, I have been needing to find me some materials to build 2 wench up feeders.

I been to Baytown scrap yards and don't find anything I need.
I want some 1/4" plate, enough to cut out two 8 or so inch circles.
And some small angle plus 1" pipe.
Then 1-1/4" pipe for legs.
Turns of city passed some laws and these scrap yards in Baytown can't have iron.
So where can I get it now without paying a arm and a leg? Used to get this stuff .05 to .10 cents a pound.


I already have my barrels and located the wenches.

[huntinfool]

Rose Steel in Houston.

[tx07]

Rose Steel in Houston.

That you for the reply.

[Mike Murphey]

Try Triple S Steel near 610 and 59 North...they have a scrap yard that you can look to see if you find anything that you need....if not you can buy it new from them...

[huntinfool]

Rose steel has the same thing. I bought a fence piece made of square tubing and mounted it on top of my old trooper, instand luggage rack. All for $10.

[tx07]

Thankies, now I have a couple places to check out.


You know I found a guy selling legged 300# camo feeders without spinners for $95.00
125.00 with analog spinner and 140.00 with digital spinner.
This is unreal for a 55 gallon feeder with legs!