Announcement

Collapse
No announcement yet.

Trailer decking wood

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trailer decking wood

    Replacing the wood on a 40 year old homemade trailer....anyone have any luck with any wood other than pressure treated Pine for the decking.....

    Its a heavy trailer so the boards will be 2" thick and 16 ft long

    thoughts?

    #2
    Oak from a sawmill, if you have someone close by.

    Sent from my SM-S918U using Tapatalk

    Comment


      #3
      Around my parts it has become popular to use ripped down telephone poles. There are a couple mills close that cut them, or at least they used to.

      Comment


        #4
        Originally posted by andre3k View Post
        Oak from a sawmill, if you have someone close by.

        Sent from my SM-S918U using Tapatalk
        I assume you have to treat it?
        Thompson water seal?

        Comment


          #5
          Originally posted by MacDaddy67 View Post
          I assume you have to treat it?
          Thompson water seal?
          Thompsons is the worst!

          Comment


            #6
            Good info in this thread- https://discussions.texasbowhunter.c...hlight=Trailer

            Comment


              #7
              Originally posted by Razorback01 View Post
              Think I just found a use for the 10 gallons of old oil I was wanting to take to oreillys.....

              Diesel and oil...roll it on and let it dry a few times I guess....

              Oak 2x10s

              Comment


                #8
                I have several gallons of used Rotella under my shed just reserved for trailer wood replacement.

                Comment


                  #9
                  Originally posted by MacDaddy67 View Post
                  Think I just found a use for the 10 gallons of old oil I was wanting to take to oreillys.....

                  Diesel and oil...roll it on and let it dry a few times I guess....

                  Oak 2x10s
                  I do not recommend that. After it rains it will become slicker than snot on a porcelain doorknob. And stay that way.

                  Comment


                    #10
                    Originally posted by Dusty Britches View Post
                    I do not recommend that. After it rains it will become slicker than snot on a porcelain doorknob. And stay that way.
                    Even after soaking in for awhile? I would think yes, after just applying it.
                    I don't know, just asking.

                    Comment


                      #11
                      I treat my trailer deck every year with a mixture of boiled linseed oil and diesel fuel.
                      As far as the right wood to use, not sure about that one.


                      Sent from my iPhone using Tapatalk

                      Comment


                        #12
                        On Semi trailers I've used rough hewn oak and Apitong. Never treated either.

                        The rough hewn you might have to Tetris it a bit. The stuff we used wasn't a consistent width and the thickness varied a bit too. Also it's not ship lapped but the Apitong is.

                        I know the Apitong can be spendy not sure on the rough hewn

                        Comment


                          #13
                          Rumber


                          That said, I have a trailer that has been treated with used oil 4-5 times. I generally apply when its hot AH and do two thin coats. Usually use a stick and an old rag to mop it on. We have one trail that got maybe 2 heavy coats and the deck is easily 25 years old.

                          Neither are slick when it rains.

                          Comment


                            #14
                            Anyone tried applying Herculiner or other truck bed liners to PT lumber?

                            Comment


                              #15
                              I did mine with red oak from a sawmill and treated with a mixture of motor oil and diesel. It soaked in really good with no residual left. I’ll probably do another treatment about august.

                              Comment

                              Working...
                              X