Replacement Key Fobs

[TexasBob]

Recently bought 2 used vehicles which only came with one fob each. These are push button start fobs. One Honda and one ford. Where do I get a new one and have it programmed in the Houston area? Sales guy mentioned a mobile company but I didn’t write it down.


Sent from my iPhone using Tapatalk

[Lost10mm]

Most general locksmiths should be able to do it. Often at half the cost (or less) of dealerships.

[Aggiehunter08]

Most general locksmiths should be able to do it. Often at half the cost (or less) of dealerships.

This, they charged me $50.

[M16]

Jeff Tran

+1 (281) 250-4334

[texas_legend]

I replaced a bad one on my GMC. Bought off internet and programming proceedure was on Youtube. It took 30 minutes due to security time outs but easy DIY.

[TexasBob]

I replaced a bad one on my GMC. Bought off internet and programming proceedure was on Youtube. It took 30 minutes due to security time outs but easy DIY.

You need two fobs to diy it I’m told. Stupid, but how it seems to be


Sent from my iPhone using Tapatalk

[rjet]

Recently bought 2 used vehicles which only came with one fob each. These are push button start fobs. One Honda and one ford. Where do I get a new one and have it programmed in the Houston area? Sales guy mentioned a mobile company but I didn’t write it down.



Sent from my iPhone using Tapatalk

I have two fobs from a 2016 f150 you can have if they are the same type.

They look like this: https://www.amazon.com/Replacement-C...016+Ford+F-150