How long will it take

[Kingfisher789]

To use 7000 gallons of water spraying 3 1” sprinklers? I’m thinking 5-6 hours. No pump. City water supply

[175gr7.62]

Not nearly enough info.


Sent from my iPhone using Tapatalk

[MadHatter]

Your guess is pretty close if I had to guess.
PSI, and size of nozzle head would tell us more.

[Kingfisher789]

What do you want to know. 2-3 biggest sprinklers hooked up to 1” pipe running off ????psi good city water. 7000 gallons.

[Kingfisher789]

Less than a hr...

No way. Your better at math than…

[wickll]

Take one of the sprinklers and time how long it takes to fill a 5 gallon bucket. From there we can figure flow rate. Assuming all the sprinklers are the same , we can calculate.

Or multiply this time by 467 since each sprinkler would need to spray the equivalent of that many 5 gallon buckets.

[RedBear78]

Depends on the output of each head.If each head put out1 gpm that would be 2333.3 minutes or 38.888 hours.But need to know head discharge

[PYBUCK]

Are you watering crops or a yard? Most yard sprinklers have 2gpm nozzles. 3 sprinklers using 2 gpm each will take nearly 20 hours to use 7,000 gallons of water.

[Kingfisher789]

I promise you it won’t take 38 hrs if I only cracked it.

[MadHatter]

No way. Your better at math than…

Got me .
I was thinking 700 for some reason.