Hustler Z-turn mower just stopped

[Bill M]

I'm running along and the mower just stops, levers do nothing when moved. No oil coming from hydraulic drive units. Neutral levers are in the correct position. Drive belt in place. I think it only has one. Any clues? Any help is appreciated.

[DedDuk]

Drive belt. I treat mine like a brush hog and may have had this happen a time or two.

[Short Mag]

Broke the drive belt

[Bill M]

Drive belt is still in place. Only one belt on the mower I believe.

[DedDuk]

Drive belt is still in place. Only one belt on the mower I believe.

Or its the one on the ground you dont see under the mower anymore.

[tpack]

This is a great Hustler Owners FB page. I see if I can get any answers since I am a member.

https://www.facebook.com/groups/273064313403281

I remember someone having similar problems and it was with a switch or wiring when the controls arms are all the way out for neutral. You might look underneath to see if the arms touch something or disconnect from something when they are all the way out to stop the wheels from turning.

[Snowflake Killa]

Gas vent

Sent from my SM-N986U using Tapatalk

[Bill M]

Or its the one on the ground you dont see under the mower anymore.

Not one on the ground. Wish it was that simple.

This is a great Hustler Owners FB page. I see if I can get any answers since I am a member.


https://www.facebook.com/groups/273064313403281

I sure would appreciate it. I'll follow the link if not private.

[AgHntr10]

I had a spring break on my exmark that broke and caused the same issue. You could move the levers but the belt wouldn't engage without the tension of the spring.

[JTRichardson]

....does it have gas in it?

[Bill M]

....does it have gas in it?

Really? It runs but doesn't move.

[Rubi513]

I think there are 2 belts. 1 for mower deck and a drive belt.

[Bill M]

I think there are 2 belts. 1 for mower deck and a drive belt.

I'm trying to get a definitive answer right now. Thanks. A search does not reveal a drive belt.

[Rubi513]

Here is a video that Antler Collector put together.

[ame="http://www.youtube.com/watch?v=0ADGDe0MckY"]How To Change the Hydro/Drive Belt On A Hustler Raptor SD Zero Turn Mower - YouTube[/ame]

[Mayhem]

My hustler did this and the engine pulley came apart. I could do everything but wasn’t getting power to the transmission.


Sent from my iPhone using Tapatalk