Cub Cadet RZT - belt or spindle question

[Coacheddy]

So....seeking the GS knowledge base.

My RZT 50 needs some attention.

The blades will turn fine..,,until you hit some “tall grass.”

I came back home from overseas....mowed....noticed that...,and my wife said “it’s been doing that.”

Before I take it to the shop, was going to see if you fellas had this happen....and if there’s a way to determine if it’s a belt or spindle issue.

[PeePaw on Fork]

I had to replace the pulleys on my cub cadet a couple of times. They lose the v shape and won't grip the belt

[AntlerCollector]

Check the belt and make sure it’s still tight. You can remove the belt tension and turn the blades manually. Make sure they are all spinning free. I have the same mower and have replaced the pulleys on mine

[Oleman]

Could be the belt or tensioner. Also check build-up under the deck.

[Coacheddy]

Thanks guys that commented.

Took the belt off…

Made sure the pulleys all spun…

Put on a new belt….

Seems good to go.