When they pump it stay close to make sure they get “all” the solids and not just the liquid. I have heard of them making a quick buck with a return visit if it’s not done properly the first time.
X
-
Check the first tank where the PVC goes into the second tank to see if the filter is clogged. If you put a stick with a hook on it down the PVC tube and pull up the filter should come up. Clean that and see if your water will transfer to the pump tank. The filter is just a smaller piece of PVC with slits cut in it.
Comment
-
Originally posted by LeanMachine View PostWhat tank is your pump in? Should be in the last one (number 3). Both tanks 2 and 3 should remain "full" at all times. The tank with the pump should be the least full.
If pump is working as it should, and you are still backing up, you have a clog somewhere before 3rd (pump) tank.
The pump is in the middle tank.
Comment
-
residential septic, filters, septic system, wastewater, advance treatment, wastewater treatment, denitrification
Scroll down to the NC3, and download. That's where I found the pic, and it's better quality.
Sent from my SM-G970U using Tapatalk
EDIT:
attached PDFs.
Where are you pumping from?Attached FilesLast edited by Palmetto; 06-08-2022, 06:14 AM.
Comment
-
Originally posted by Palmetto View Posthttps://www.clearstreamsystems.com/manuals/
Scroll down to the NC3, and download. That's where I found the pic, and it's better quality.
Sent from my SM-G970U using Tapatalk
EDIT:
attached PDFs.
Where are you pumping from?
Comment
-
Ok, I get that you are pumping from the overlfow, but according to the diagram, what are you calling the overflow? OR are you referring to a cleanout between the house & tank?
This is what I gather....
1. your first (solids) tank is full and backing up into your house.
2. your pump tank is not full.
3. your clarifier/aeration tank is full.
That would mean the pipe from your aeration tank to pump tank is clogged.
I would have them pump the tank completely out. Then stick a hose into the internal pipes to flush them out. When they are done pumping out, you will need to put clean water back into the tanks.
You dont want to leave a septic tank empty. I have always heard they can pop out of the ground if it was to rain really hard.
Comment
-
Originally posted by Palmetto View PostOk, I get that you are pumping from the overlfow, but according to the diagram, what are you calling the overflow? OR are you referring to a cleanout between the house & tank?
This is what I gather....
1. your first (solids) tank is full and backing up into your house.
2. your pump tank is not full.
3. your clarifier/aeration tank is full.
That would mean the pipe from your aeration tank to pump tank is clogged.
I would have them pump the tank completely out. Then stick a hose into the internal pipes to flush them out. When they are done pumping out, you will need to put clean water back into the tanks.
You dont want to leave a septic tank empty. I have always heard they can pop out of the ground if it was to rain really hard.
Yes, I’m pumping it out at the cleanout between the house and tank. Your points are correct with my issue.
I spoke with the company I have an end of month appointment with and they are going to see about moving my pump out date up.
Thanks again for the great information!
Comment
-
Originally posted by orchard View PostMy septic guy said to never get an aerobic system. He told me they cause too many problems.
Our septic guy said that Aerobics made now are 1000x times better than they used to be and probably 80% of the systems he installs are aerobic, so I am hoping for the best.
Comment
-
My aerobic system is 14 years old, and I have pumped it out twice. The only other work I have done is changed out the diaphram in my air compressor, and changed out my submersible pump. The original pump lasted 13 years.
Last year I started using Accelerator by Dr. Pooper. Flush it down the toilet once a week. It has really decreased the amount of solids, and my septic guy has been impressed.
Comment
Comment