Metal roof flashing identification/source help

[justletmein]

Refurbishing an old cabin and need a few pieces of this metal roof L flashing, been by all the big box stores and a couple building supplies and not seeing anything like it. I'd like to find a match so I don't have to pull up the whole roof to redo it with other design. Anybody know exactly what this is called and/or where to get it?

[Short Mag]

Looks like eve trim turned upside down to me. Any sheet metal store will have it or can make it.

[justletmein]

I didn't know there was such a thing as a sheet metal store.
Thank you sir, I'll follow up on that.

[PredatorControl]

Looks like 2 pieces of eve trim put together. If draw out what you need and get the measurements of the top where slides under the tin, how far it drops down vertically at the ends of the rafters tails , and how far it tucks back under to the wall they can make it. Go to muellers or metal mart or some place with a drawing, measurements , and those pictures and they will make up what ever you need.

[CoachS]

Try alert services in New Braunfels

[GA Bowhunter]

That looks like roof drip edge(not the type made for metal roofs, just regular old drip edge).

A metal roof store will have all the profiles of accessories and they can also bend up custom end wall/side wall/drip edge/flashings/ect.

My local metal roof store will bend me up custom flashing while I wait. We use custom bent flashing to cap brick water tables on crawlspace houses.

[GA Bowhunter]

Looks like this place calls it eve flashing. I use it on eves and regular rood edges.

[GA Bowhunter]

BTW, Lowes and HD both sell it around here. Will be galvanized finish.