What ya think

[BlessedVeteran0305]

I've seen everyone painting, dipping and whatever else to their rifles so I wanted to try something a little different. Let me know what yall think.

[Pstraw]

That's right classy.

[kruppa24]

I think I like a lot

[Briar Friar]

Looks like a tree limb. Good pattern for a brush gun or tree climber gun. Maybe lay a grey or light brown base then top pattern as displayed. Well done as is MrBlessed.

[txtimetravler]

Looks good

[BlessedVeteran0305]

Thanks I used the flake we use for installing our concrete coating system at work.

[3ChordTruth]

Good pattern and color.

[tminc]

Nice work

Sent from my SM-N950U using Tapatalk

[Duane]

That's pretty slick. I'd be careful leaning it up against a scraggly old mesquite, you might lose it!

[BlessedVeteran0305]

Thanks just need to find a stronger top coat just to be safe.

Any ideas would be appreciated.

[eastover53]

Thanks just need to find a stronger top coat just to be safe.

Any ideas would be appreciated.

SprayMax 2K 680065 clear coat. Matte finish.

I use the high gloss on motorcycles, and it’s great. It is a two part clear coat in a rattle can. Has a hardener inside the can that you puncture with a button on the bottom.

Downside is that you have about two hours to use it, or it will harden inside the can.

https://www.amazon.com/USC-Spraymax-Matte-Clearcoat-3680065/dp/B0178ABUVM/ref=sr_1_2?crid=1KNR8AUW47V5N&keywords=spraymax+2k+clear+coat+matte&qid=1644787605&sprefix=spraymax+2k+clear+coat%2Caps%2C259&sr=8-2

[BlessedVeteran0305]

SprayMax 2K 680065 clear coat. Matte finish.

I use the high gloss on motorcycles, and it’s great. It is a two part clear coat in a rattle can. Has a hardener inside the can that you puncture with a button on the bottom.

Downside is that you have about two hours to use it, or it will harden inside the can.

https://www.amazon.com/USC-Spraymax-...s%2C259&sr=8-2

Thank you for that never heard of it. Will check it out.

[Travis Deveney]

Looks good