I needed to change a couple of my barrels out. Wrapped 1 x 2 wire mesh around the outside of the barrel. Spin plate is 9 1/2" away from the wire, do you think the coons can still reach it?
Announcement
Collapse
No announcement yet.
Question for coon experts?
Collapse
X
-
No expert....just infested.
You should be aight .....my coons could spin it at 9-10" but my holes we 2"x4" and they could get to their shoulder...being 1x2 you should be ok.
These cages above are 20"x20" with 2"x4" holes. Beloe you can see where I had to overlay 1x1/2" mesh to keep them from spinning it. I ended up cutting the mesh out to 1"x1"...
Last edited by Smart; 04-26-2009, 08:38 PM.
Comment
-
They can still reach it if you have some over achievers like I do. I have had this cage for 3 or 4 years and never had a problem with them getting to it until I move it to this place I got this year. The cage is the same diameter as the barrel amde out of 1x2 wire. I had a ontime timer with the solar panel rapped around the housing that they destroyed and in this picture you can see the coon can reach the spinner by the corn falling.
I have trapped 5 and shot 1 and thought I had taken most of them out until I check the camera this weekend and saw this picture.
Man I hate coons
Comment
-
Originally posted by JMG View PostThat's the set up I use. They have to get the corn off the ground if they want some. Did you make a door to get to your timer to make time adjustments or battery? Looks good.
Thanks for all the info.
Comment
Comment