Swimming Pool Guys

[lilavidhunter]

So I have tried to get my Pool Going for 2 days with no Luck. I’m sure many on here are in the same boat.

I drained both pumps and filter before the freeze. No obvious cracks on any equipment. I primed both pumps, closed the relief valve on the filter, and when I hit the Button from Service Mode to Auto, nothing happens.

I’m in line from 2 pool companies for help but it’s 2-3 weeks out. Any suggestions on what I’m missing?

[brokeno]

So are you getting suction at your skinner basket. Sometimes it takes a while to pick up. I try fill the suction line with a water house til,it back flows in the skimmer basket and kick the pump on.

[lilavidhunter]

So are you getting suction at your skinner basket. Sometimes it takes a while to pick up. I try fill the suction line with a water house til,it back flows in the skimmer basket and kick the pump on.

Will try that in the Morning. Usually, when I turn the System to Auto, which is “Run” Mode, I at least hear the Pump Motor come on.

[RatherBhuntin]

When you say nothing happens do you mean the pump does not come on or pump comes on but does not circulate

[RatherBhuntin]

Guessing from your post above mine pump does not come on.
While in service mode hit the filter button see if pump comes on. If not check the 2 pole breaker for the pump. I've gone to a few customers that the breaker tripped one leg of the pump breaker. Turn breaker off then on again see if that helps

[lilavidhunter]

Pump does not come on.

[Jet Black]

Auto means it’s going to run the schedule or be able to be controlled remotely. Are you sure your clock didn’t get reset and it’s not currently “on” per the schedule and the reset time?

I’d leave it in service mode and hit the button for the filter pump and see what happens.

[lilavidhunter]

Guessing from your post above mine pump does not come on.
While in service mode hit the filter button see if pump comes on. If not check the 2 pole breaker for the pump. I've gone to a few customers that the breaker tripped one leg of the pump breaker. Turn breaker off then on again see if that helps

Thanks Much. Will try that in the Morning.

[lilavidhunter]

I’m gonna try all these Suggestions in the Morning. Thanks Much for the Feedback.

[Fishndude]

Bad braker? That’s what happened to mine.

[lilavidhunter]

[QUOTE=Fishndude;15496004]Bad braker? That’s what happened to mine.[/QUOTE

Thought about that, but my Pool Panel works and I have lights around my Grill that work just fine. All on the same Circuit.

[lilavidhunter]

Auto means it’s going to run the schedule or be able to be controlled remotely. Are you sure your clock didn’t get reset and it’s not currently “on” per the schedule and the reset time?

I’d leave it in service mode and hit the button for the filter pump and see what happens.

Thanks very Much. Looks like this was the issue.

[Fishndude]

Thanks very Much. Looks like this was the issue.

Good deal. Got dang pools