i was talking with a guy here off and on about ls engines i cant remember who you are,if you see this please contact me im having no start issue with msd 6010..... im going out now to check all grounds and voltages...if you have any suggestions please advise i know there were lots of issues with those boxes....
-
-
Was probably me your thinking of. I’ll send you a text later this am
Sent from my iPhone using Tapatalk -
yes i believe i found the issue,with key in start i was loosing power to box i know shortly....Comment
-
Harlan lets do a LS swap into the mini truckComment
-
-
LOL well I do have an extra 6.0 sitting in the garageOriginally posted by kingranch View Post
Round up some 2x3 tubing for a new frame and that little thing would be a beast.Comment
-
This^^Originally posted by kingranch View Post
I had the same issue when I put a new MSD distributor and fuel injection system in my Buick Wildcat.
I ended up putting in a small fuse & relay box in the engine compartment because I also replaced the old wiring with a newer setup and for some reason the coil wire would not have power while cranking.
Good luck.
JComment
-
no luck it seems 6010 box needs 200 rpms cranking for it to fire plugs so i pulled all the plugs spun it over it looked like a christmas tree under the hood i put them back in 1 at a time the spark slowly faded till the last one went in got backfire a few times but no start i ordered the new 6014 box monday it is....Comment
Comment