Hate grease guns

[Burnadell]

your suppose to lube them ? I sold mine at 350K miles never lubed anything and never had an issue. Mine was a 2004. Not sure if it had zerks or not.

That was my understanding. I didn't think ther were any grease zeks or need to grease vehicles any more. I was told a couple of trucks ago that they are sealed and do not need greasing! What's the skinny?

Don't complain about grease guns . We use to have to reload
them out of a 5 gallon bucket before they started making the cartridge .

Exactly!!! I have done that also...in my youthful years!

[berettadave]

In my dealings with most grease guns I have found there are two kind. Those that are a piece of crap and those that will be shortly. I may have to try a couple mentioned above. I normally by a new one every few years.

Dave

[Chad74]

After reading all the praise on the Lock N Lube, I had to try it. Just ordered one off Amazon.

[SaltwaterSlick]

Buy some of these to put on your grease guns.

https://locknlube.com/collections/gr...gun-barrel-cap

mine leaked out the back of the tube where the T handle rod for the compression spring is retracted... They get hot in the barn and the grease drips out of the back of the gun onto my slab... Thinking I'm gonna get me one of those grease gun holder mounts and mount it horizontally or with the plunger side up on my tractor somewhere...

[Burnadell]

Seriously, am I wrong about vehicles not having grease zerks these days?

Where are they located? What vehicles are you guys greasing?

[peterp63]

Seriously, am I wrong about vehicles not having grease zerks these days?

Where are they located? What vehicles are you guys greasing?

My Chevy has at least 6 grease points (zerks) on the suspension.

[OldRiverRat]

So while we are on the subject
I have a couple of zerts on the ujoints on my batwing I can’t get a good connection on
Does anyone make a smaller or some kind of angled connector for this purpose?


Sent from my iPhone using Tapatalk Pro

[Burnadell]

My Chevy has at least 6 grease points (zerks) on the suspension.

What year?

[Worksalot]

So while we are on the subject
I have a couple of zerts on the ujoints on my batwing I can’t get a good connection on
Does anyone make a smaller or some kind of angled connector for this purpose?


Sent from my iPhone using Tapatalk Pro

Lincoln has a kit. Northern Tool has it and other brands.

https://m.northerntool.com/shop/tools/product_200324391_200324391

[Burnadell]

From the interweb:

"All cars need periodic oil and filter changes, usually every 3000-5000 miles. Modern cars do not have grease points and all those joints are permanently lubricated."

[peterp63]

what year?

2013

[peterp63]

2013

I forgot to mention I do have a lift kit installed. But Google says stock has 2 zerks on the upper tie rod ends.

[Burnadell]

My Chevy has at least 6 grease points (zerks) on the suspension.

2013

I forgot to mention I do have a lift kit installed. But Google says stock has 2 zerks on the upper tie rod ends.

Interesting. I have been told that my 2014 GMC pickup does not need greasing. Gonna have to check.

[DEADEYE1]

Dewalt

Best thing money can buy! I use it on my tractor and it saves so much time and headache!!!!!Also less mess! buy one you wont regret it I promise!!!!!!!!!

[Goldeneagle]

Interesting. I have been told that my 2014 GMC pickup does not need greasing. Gonna have to check.

My 2013 1500 does not have grease fittings. I was looking under it last week while getting a tire.