Announcement

Collapse
No announcement yet.

RV troubleshooting... head scratcher

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by BTLowry View Post
    Seems like there is some kind of safety valve in the system that can go bad

    Been a while since we had an RV
    Yep, the surge shut-offs. Turning on the gas bottle with the burners turned on can activate them too. Had some that were basically new get stuck on a friends cook trailer and had to replace.

    Comment


      #17
      Originally posted by Low Fence View Post
      It’s covered and flawless. No dry rotting

      Guess I’ll replace regulator first. Just hate changing parts to find a problem
      Hook a gauge up to the regulator, should be showing a little bit of pressure.

      Or, leave bottles open, unhook the gas line in the camper, should be somwhere in the side panel I think? You should hear gas hissing out, if it’s getting there. If it is, your tanks and regulator are good, and maybe some slight blockage.

      Do RV lines have check valves? If so could be that somewhere down the line. But you can check regulator very simple without replacing it first.

      Comment


        #18
        Sounds like the flow checks in the tanks could be going bad. Close the valves and listen should be able to here them open back up. Then open the valves up very slowly.

        Comment


          #19
          If I hook up tanks. Turn em in. Then turn em off and unhook I get the short propane burst that’s common

          Comment


            #20
            Just stopped by house and checked again. Stove wouldn’t light. Turned on furnace... it lit. Then stove lit. Turned on fridge to propane. It’s working

            No telling if Jebadia got something in the lines or not.

            Comment


              #21
              .... turned furnace off and tried to relight stove. Nada

              Comment


                #22
                .... and furnace on and it lights

                Comment


                  #23
                  .... and nada

                  Comment


                    #24
                    Originally posted by Low Fence View Post
                    Just stopped by house and checked again. Stove wouldn’t light. Turned on furnace... it lit. Then stove lit. Turned on fridge to propane. It’s working

                    No telling if Jebadia got something in the lines or not.


                    Originally posted by Low Fence View Post
                    .... turned furnace off and tried to relight stove. Nada


                    Originally posted by Low Fence View Post
                    .... and furnace on and it lights


                    I was going to say it’s the thermo couple in the oven until this little development.

                    No idea now

                    Comment


                      #25
                      Regulator...same issue here, and i need to replace mine.

                      Comment


                        #26
                        Had similar issues. Put on a new regulator. Fixed the problem.

                        Sent from my SM-G965U using Tapatalk

                        Comment


                          #27
                          Originally posted by low fence View Post
                          if i hook up tanks. Turn em in. Then turn em off and unhook i get the short propane burst that’s common
                          yes

                          Comment


                            #28
                            Originally posted by Low Fence View Post
                            .... turned furnace off and tried to relight stove. Nada
                            Regulator

                            Comment


                              #29
                              The regulator is not coming off seat for the small demand of the stove. It takes the large demand of the furnace to get it to lift. The regulator is bad.

                              Comment


                                #30
                                Looks to me like you need to go get that regulator.

                                Sent from my SM-G970U using Tapatalk

                                Comment

                                Working...
                                X