HV510 fuse source?

[BTLowry]

If you know what this fuse is then maybe you know a good CHEAP source for them

Ceramic fast blow, ~1/4" x 3/4"

Need a 10A 600VAC and a 200mA 600VAC

go in a multimeter, place I found that has them they are $8 and $9 ea

Hoping someone knows where to get some cheap

Fuses are blown for sure but not sure the control board survived so don't want to spend $20 on 2 fuses to find out that I have to buy a new

All I will say is he meter was NOT made to check what I attempted to check with it

[BTLowry]

Surely out of all the members on this site someone has a lead

[Radar]

What brand is the meter?

Fuses are not cheap for multimeters. The manufacturers recommend fast acting fuses to protect the circuitry.

[BTLowry]

Southwire Jeff

I can buy a new one for about what 3 fuses cost

I found some cheaper prices but you need to buy a container full or they are "out of stock"

[Radar]

Probably go buy another meter. You could just make a jumper and try the meter unprotected to see if it works at all