Knife repair needed

[Stan R]

Not a fancy or even a good knife. I got it from my brothers place when he passed. So it has meaning. It broke as you can see in the pic. Would some be interesting in fixing it fir me.




Sent from my iPhone using Tapatalk

[Stan R]

Sent from my iPhone using Tapatalk

[Reelthreat]

I don’t see where it is broke???

Are you wanting a new handle put on it? Post some more pics... I should be able to do it for you but I need to know what you want done.

*edit*

Saw the second post/pic. If someone can weld it for you I can do the handles in any wood you would like and clean up the blade.

[Lonestar_HOYT]

Looks like it broke just inside the handle.

[bobc]

I don’t see where it is broke???

Are you wanting a new handle put on it? Post some more pics... I should be able to do it for you but I need to know what you want done.

*edit*

Saw the second post/pic. If someone can weld it for you I can do the handles.

Look about an inch back from the fore end of the scales. Looks like blade is broke.


Sent from my iPhone using Tapatalk

[Stan R]

Blade broke.

I can get it welded


Sent from my iPhone using Tapatalk

[Reelthreat]

Blade broke.

I can get it welded


Sent from my iPhone using Tapatalk

Make sure whoever welds it wraps the blade with a wet rag so heat doesn't run up the blade and ruin the temper.

[Stan R]

Make sure whoever welds it wraps the blade with a wet rag so heat doesn't run up the blade and ruin the temper.

I did not know that thanks... I'll reach out when I get it welded. Thank you very much.

[Atfulldraw]

I'd put it in a shadow box and hang it on the wall as is....

use another knife to cut stuff with.

[Louis]

Get hold of Bob Jankowski in burleson . He's the master at making an d repairing knives. Guarantee he can fix it. He's a member on here. Go to Jankcustomknives.com

[White Falcon]

Broken at rivet hole. Might just be on one side of the hole. Easy fix, a quick weld and new rivets. Use wet rags on either side of weld to keep heat from blade.

[Stan R]

Broken at rivet hole. Might just be on one side of the hole. Easy fix, a quick weld and new rivets. Use wet rags on either side of weld to keep heat from blade.

I think it is both sides. blade wiggles up and down


I'll take the handles off in the next few days.

[White Falcon]

Weld, and grind to match!

[Reelthreat]

In case you were wondering about my knife building skills... here is a matching set I made for my friend and his father for Christmas.

[Dave]

I'd put it in a shadow box and hang it on the wall as is....

use another knife to cut stuff with.

This is your answer I'm afraid.