Help me pick an arrow and broadhead

[Trophy7]

It’s been a long time since I bought arrows and broadheads, but I bought a new bow and figured I’d get the advice from the GS on a new arrow and broadhead combo. My draw length is 27” and the draw weight is set at 65lbs. I’m shooting a D loop and wrist strap style release (if that matters). My old bow I shot 100 grain Thunderheads. I’d like to stick with 100 or 125 grain fixed, but not opposed to hybrid broadheads either. I’ll mostly be hunting deer and hogs. I looked at FMJs, but want to get some thoughts before pulling the trigger. Thanks!

[kd350]

Not a fan of fmj’s. But the axis or gold tip kinetics are both good arrows. Nothing wrong with thunderheads, the grim reaper micro hybrid is a great hybrid. Magnus black hornet or rages are good as well

[Aggiehunter08]

I’ve taken FMJs all over the place and they have never failed me. Another vote for Grim Reaper Pro Micro Hybrid.

[critter69]

I have tried a ton of different arrows, std then fat then skinny and back to std.dia. I personally like gold tip arrows, they have been the most durable, easy to get, don’t change after a few years making you buy something different. Many of the skinny shafts, I had issues with strength, then tried footers, outsert, some require different broad heads, it was a pain in the *****. I still have a few fmj with the side blown out in front of the hit insert ( another gimmick to get you to buy new arrows.) i shoot 65-80 lb. 28.5 in draw, and use 350s, or if I want to shoot heavier broad heads ( fact weights added to the inserts) or heavier weight I use 300 shafts. There are a huge offering of broad heads, and your going to hear tons of suggestions. Buy a few packs of the ones that interest you and try them your self.

[Fishndude]

Easton Axis will put you at a great weight for all around hunting. Easton makes a great arrow. Stick with your Thunderheads.

[glpoe1]

My DL is 27.5 @ 60lb. I shoot a Halon 6, Helim and a SBXT, all at 60 lb. My arrow preference is GT Pierce 400 (27.75"), GT Hunter Pro 400 (27.25") or GT Velocity Pro 400 (27.25"). All are fletched with 2" Blazer vanes and 100 gr. field points. Weight will range from Velocity 345 gr., Pierce 369 gr., Hunter Pro 378 gr. I don't remember the FOC % but the Pierce had the higher percent due to the outcert which I really like. I have had no issues with any of these shafts and highly recommend them. My personal preference for a boradhead is the Slick Trick Standard 1 1/8" or the Magnum. It has been a while since I ran an arrow through the crono so I have no current data to share. My experience with the GT is they are tough and accurate, more than me.
Gary
Snyder, TX

[Trophy7]

All great info guys, keep it coming. This might be a loaded question, but based on my draw length and and draw weight, any idea what size and length the arrow shaft should be?

[txoutdoorsman24]

Easton axis 5mm in 340 would be perfect for you. Maybe back off a lil and shoot a 400 spine. I personally shoot Axis 300s with 100g Rage extreme and 100g Kudu heads. I think you might like the kudu solid heads.

[Sleepy]

All great info guys, keep it coming. This might be a loaded question, but based on my draw length and and draw weight, any idea what size and length the arrow shaft should be?

What is your budget and end goal?

Lots of good shafts out there, but IMO, find something that would put you in that 450-500 grain range with 20% FOC, and you’ll have some straight flying, penetrating darts. That weight range is a great happy medium for speed and penetration.

I have some recommendations, but need to know budget.

[Trophy7]

Hadn’t really thought about budget honestly. I don’t want to spend an arm and leg, but I don’t mind throw some money at good, quality equipment. End goal would be exactly what you mentioned, straight flying, hard hitting and good penetration.

[docmay]

I would go Easton axis 340 as a first choice. If you want to get fancy throw a collar up front. I like iron will but there are others. I would consider a shorter more compact broadhead for better flight. I love qad exodus and slick trick magnums. Lots of great heads out there. Just remember that 3 abd 4 blade heads will put blood on the ground more consistently than a 2 blade or 2 blade with bleeder design.

[Sleepy]

Hadn’t really thought about budget honestly. I don’t want to spend an arm and leg, but I don’t mind throw some money at good, quality equipment. End goal would be exactly what you mentioned, straight flying, hard hitting and good penetration.

PM Sent

[lovemylegacy]

Youve done it now

[KX500]

Full disclosure - I'm kind of a tightwad. And if something cheap, will do the job for me the same as something more expensive......

Anyway, I probably stuck with aluminum arrows longer than most. And then one 'Walmart markdown season' I found their carbon arrows going for $1 each. So of course I bought enough to make the switch. I never had any problems with these arrows - Carbon Wolverines. Oh occasionally one would not behave the same as the rest, so it became a practice arrow. Pretty sure these are made by Carbon Express. And Walmart always has a ready supply (in season) and marks leftovers down at the end of every archery season.

I figured, if the fly well, why not?

[glpoe1]

All great info guys, keep it coming. This might be a loaded question, but based on my draw length and and draw weight, any idea what size and length the arrow shaft should be?

Check the spine charts for each brand. I think you will be falling in the 400 spine range. I personally like a lighter arrow and have had great success on hogs and deer. Heavier arrows may be better but I have not had the need to changed my set up. My arrows are cut to extend just a little bit past the riser to clear the broadhead. Mine are between 27.25 - 27.75 in.