This is my Henry single shot in 45-70. I'd already replaced the trigger spring and installed the Skinner peep. Finally got around to the following:
Cut the rail so the peep could stay
Epoxy bedded the rail for maximum contact (It's still removable)
Cut the hammer down about 1/8" for additional clearance
Mounted a VX-3i 2.5-8x36 in Warne low rings
[ATTACH]982164[/ATTACH]
[ATTACH]982165[/ATTACH]
Cut the rail so the peep could stay
Epoxy bedded the rail for maximum contact (It's still removable)
Cut the hammer down about 1/8" for additional clearance
Mounted a VX-3i 2.5-8x36 in Warne low rings
[ATTACH]982164[/ATTACH]
[ATTACH]982165[/ATTACH]
Comment