I have a 70# draw with a 29" draw lenght and the sticker on my bow has a minimum arrow weight of 420 grains. What gives? Can I safely shoot a ligher arrow as long as the spine is stiff enough?
Announcement
Collapse
No announcement yet.
Minimum Arrow Weight
Collapse
X
-
use a grain scale to get the wight of your arrow with the head on. Divide that by your poundage and make sure it is above 5.0. If it is below 5.0 then you need to do something to make the arrow a little heavier. At least that is what I have been told by several different folks that should know what they are talking about. A lot of arrows show the grains per inch on the arrow. If you don't have a scale just measure your arrow and multiply the legth by the grains per inch + 15 grains for vanes + 10 grains for insert + 5 grains for knock + amount of grains of your broadheads = total arrow grains. Divide that by your bow poundage. That is what I do anyways
-
420 gr arrow equates to 6 grains per inch. Most manufacturers will not warranty limbs if the arrow is below 5 grains per inch. I think the average hunting arrow is somewhere around 9gpi, and they go down from there into the lighter target configurations, and the lightest that I have seen made by Easton was 6.5 GPI. High Country makes a speed arrow that is somewhere near 3 GPI, and they are the ONLY mfgr. that recommends shooting them. The lightest you could shoot and still keep from voiding your warranty would be 350 gr. at 70#.
Comment
-
Originally posted by shaft_slinger00 View Postthe hca speed pro come in to sizes a 5.5 and a 6 i due beleive..
Been talking to HCA about the performance and they are totally acceptable to that weight.
The rule as everyone says is 5.0 and above. I would call the dealer or manufactor and ask "why?"
Comment
-
Originally posted by hcshooter View PostI am shooting my Speed Pro at 5.2 grains per lb.
Been talking to HCA about the performance and they are totally acceptable to that weight.
The rule as everyone says is 5.0 and above. I would call the dealer or manufactor and ask "why?"
Comment
Comment