Attention all tractor gurus, help needed.

[Shortbow]

Can anyone either tell me the name of this part or tell me what I need to fix it. While backing up my tractor, a broken tree trunk came up and broke my hydraulic steering linkage. I am unable to find and part on the ground so I am not sure what I need to repair. I can’t steer it to put it on a trailer to haul to a shop. I don’t know if I need the entire piece that parallels the axle or just a piece that’s missing in the gap. Thanks.

[Worksalot]

Hydraulic steering cylinder? Or power steering cylinder? I don’t have any of my Deere manuals handy to look up parts. You can try https://partscatalog.deere.com/jdrc/

[gonehuntin]

Shane, look up Deere.com and look up your model. They have parts break down online.

[Hog Grim Reaper]

Looks like the shaft for the steering cylinder will have to rebuild the cylinder

[PEC]

As mentioned above it is the steering cylinder. You have a few options 1. Find a used one 2. Find a new one (expensive) 3. Buy cylinder rod and rebuild.
I believe your part number is LVA14159.

[Trevor73402]

Be sure and compare “aftermarket” new replacements vs the cost of a rebuild. I don’t know where you are, but In my area, they act like rebuilding a cylinder is brain surgery and they charge accordingly. I was able to buy a new one for what they wanted for a rebuild.

[oneeye]

Most of the steering cylinders on the smaller Deere tractors are disposable. Just buy a new one.

[Shortbow]

Thanks guys.

[clay4626]

call b and m tractor in Taylor they might have a used one

512 3528515

[Radar]

Most of the steering cylinders on the smaller Deere tractors are disposable. Just buy a new one.

Yes, they are welded together and cannot be taken apart. I had a JD 4300 and the steering rod got bent, was a throw away cylinder. Had to buy new.

[RMW]

Hydraulic steering cylinder is trashed, go to John Deere and get a new one

[Mofo]

I have the same tractor and just had to change a hydraulic hose on that cylinder. It is a pain the butt because of where the connection goes from tubing to hose is tucked up inside the frame and you can't get a wrench in there. Almost had to drop the front axle to change the hose.

[Graysonhogs]

Be sure and compare “aftermarket” new replacements vs the cost of a rebuild. I don’t know where you are, but In my area, they act like rebuilding a cylinder is brain surgery and they charge accordingly. I was able to buy a new one for what they wanted for a rebuild.

Act is right. lol. Cylinder rebuild is about as simple as it gets.

[gonehuntin]

Check with Weavers Compact Tractor Parts for a used cylinder, 717-477-9332. They have tons of salvage tractors.

[Dusty Britches]

Obviously, you sure do not want to call United Ag out - even if you tell them exactly what needs to be done they will charge $120 to come out, write a ticket, return to Cameron get the part and another $120 to come back out to do the work, plus labor plus parts.

Since you seem like you can do the work, try https://www.tractorpartsasap.com/par...tor-parts.html.

I have used these guys several times and they've been helpful.