How many panels and t post do y’all use to make a feed pen? Will have a spin cast feeder inside pen.
Announcement
Collapse
No announcement yet.
Feed pen question
Collapse
X
-
We use 16 panels with 33 t-Posts... Thats a t-post at each end of each panel and one in the middle of each panel... overlap panels 1 square and wire to each other and to the posts... That will give you a pen 24 yards diameter. We use the 34" hog panels. Easy to lay out too. We take a string and a stake it where we want the feeder, then tie a can of striping paint in the string at 12 yards and make a paint stripe on the ground. Pull the stake, place the feeder, then put panels up on the paint stripe and stake 'em down.
Comment
-
Originally posted by sideways View PostI’m not saying that bigger isn’t better but my pen is made with 4 panels and is full of deer morning and evening
Sent from my iPhone using Tapatalk Pro
Comment
Comment