Looks good...hard to tell if it’s a 55 or 85gal barrel? Shed the ring with the bolt. They are a PITA! Replace with a good galvanized lid and Bob’s Your Uncle! [emoji108]
I like my design. I have found a flaw. The 1x1 wire is too small. it looks like a popcorn popper in the cage then it all falls under the feeder. Have to change that.
Looks good...hard to tell if it’s a 55 or 85gal barrel? Shed the ring with the bolt. They are a PITA! Replace with a good galvanized lid and Bob’s Your Uncle! [emoji108]
I took your advice. I just finished 3 of them. All 85 gallon drums.
If your spinner is not below your frame that will be what your corn is hitting and going straight to ground, that's what mine was doing and had to add a ext. to lower spinner, hope this helps.
If your spinner is not below your frame that will be what your corn is hitting and going straight to ground, that's what mine was doing and had to add a ext. to lower spinner, hope this helps.
God Bless
Bish
Yup....I had to add a lower “downspout extension” of sorts to mine.
Comment