Atv trailer

[BlakeS]

Has anyone used one of these atv trailers. Yutrax or the cabalas Xt1500. I want one to haul corn around the lease to fill feeders. Just looking for some reviews from yall.


Sent from my iPhone using Tapatalk

[slayer]

yep, got mine at Northern Tool. It will hold 12 bags of feed at one time. I had the main bar welded shut eliminating the dump bed. This made it stronger and less noisy.

[BlakeS]

yep, got mine at Northern Tool. It will hold 12 bags of feed at one time. I had the main bar welded shut eliminating the dump bed. This made it stronger and less noisy.

Is it capable of hauling more or is that all you can fit on it?


Sent from my iPhone using Tapatalk

[Mountaineer]

I haven’t tried one of those type, but you can’t beat the metal John Deere cart. I think mine is rated for 1400 lbs or more. It goes through a lot of mud and creeks no problem even when loaded full. Really handy to have when it’s too muddy to use the tractor to haul stuff.




Sent from my iPhone using Tapatalk

[Jon B]

I made the mistake of buying a Tractor Supply lawn mower trailer......yeah don't do that.

[BlakeS]

I just found one of these trailers used should pic up soon and put to the test can’t beat it for $125


Sent from my iPhone using Tapatalk

[100%TtId]

I have the Cabelas xt1000 model and it works great. It is much safer to drag a load of corn in the trailer than to load it on your atv. It does not have any suspension so going over bumps at speed can upset the trailer. I added a bunch of mods to mine, a regular ball hitch, for example, helps it rotate on uneven terrain. If I had it to do over again, I would buy the 1500 simply because the 1000 uses a very hard to find tire/wheel combo and the 1500 gives you a bit more ground clearance.

[slayer]

Is it capable of hauling more or is that all you can fit on it?


Sent from my iPhone using Tapatalk

Thats about as many bags as you can make it haul. It will hold 3 bags side by side, 4 deep. I have carried 15 bags on it, but its hard to keep them from falling off at that point. I also had a solid sheet metal welded into the bottom because the feed was getting wet. It works exceptionally well. You will not go wrong.

[Mudslinger]

Slayer, exactly which one do you get?

[texan4ut]

Fhttps://www.northerntool.com/shop/tools/product_200641809_200641809 Found this at Northern tool. Don't know if it is any good. Good price

[slayer]

Slayer, exactly which one do you get?

https://www.yutrax.com/Product/2722/x2-steel-mesh-utility-trailer

PRODUCT SPECIFICATIONS
DIMENSIONS WITH RAILS ON 60" x 31" x 21"
DIMENSIONS WITH RAILS OFF 60" x 31" x 9"
WHEELS 2 Flotation Off-Road with Needle Bearings
WHEEL SIZE 18" x 8.5"
WHEEL LOCATION Side-Mounted
CAPACITY 1250 lb
BED VOLUME WITH RAILS ON 20.5 cuft
PIVOTING BED Yes
TILTING BED Yes

[slayer]

https://www.northerntool.com/shop/tools/product_200674098_200674098

This is just like mine, except mine is black and red. I had a regular hitch welded on the front, welded the main support so that it no longer dumps and had a sheet of 14 guage steel cut for the bottom, then sprayed with bed liner. I put slime in the tires, she works like a champ.